Mishimoto radiator owners...
Discussion
...do you have chuff-all space between the fans and the lower coolant hose? I removed the air dams either end of the rad which were pushing it back, and bent the brackets on the coolant pipe running across the cross-member back as far as I could, and have about 6mm clearance. I expect to lose a couple of mm when the system is pressurised. I also pinched the channel the rubber donuts run in so all play is between the rad trunnions and the ID of the rubber donuts.
04 setup, but I assume that pipe is shared.
04 setup, but I assume that pipe is shared.
GSE said:
Recently replaced the rad in my 04 with a Mishimoto ... exactly the same scenario
I couldn't reasonably see how there could be much more clearance, but thanks for confirmation I didn't mis-seat it. I'll keep an eye on it...but if it frets I think I'll get some blow-through SPALs.Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff