Spotted M27 broken down
Discussion
I rerouted my hoses behind the clutch pipe, I think that's where they should have gone all along.
http://www.pistonheads.com/gassing/topic.asp?t=143...
Check your fuel line isn't rubbing through on the engine cover whilst your there.
if your changing the heater hose and you get a genuine replacement set from the fish remove the bulkhead ends first then unclip the control valve from the chassis leg (just pulls out of c shape spring clip ) then you can pull the whole thing up out of the engine bay to remove and replace the other connections then replace the valve back on the chassis clip then thread the pipes up behind the steel clutch pipe checking you're happy that they are not fouling any moving parts
http://www.pistonheads.com/gassing/topic.asp?t=143...
Check your fuel line isn't rubbing through on the engine cover whilst your there.
if your changing the heater hose and you get a genuine replacement set from the fish remove the bulkhead ends first then unclip the control valve from the chassis leg (just pulls out of c shape spring clip ) then you can pull the whole thing up out of the engine bay to remove and replace the other connections then replace the valve back on the chassis clip then thread the pipes up behind the steel clutch pipe checking you're happy that they are not fouling any moving parts
Edited by L2VXR on Friday 1st July 08:39
L2VXR said:
I rerouted my hoses behind the clutch pipe, I think that's where they should have gone all along.
http://www.pistonheads.com/gassing/topic.asp?t=143...
Check your fuel line isn't rubbing through on the engine cover whilst your there.
if your changing the heater hose and you get a genuine replacement set from the fish remove the bulkhead ends first then unclip the control valve from the chassis leg (just pulls out of c shape spring clip ) then you can pull the whole thing up out of the engine bay to remove and replace the other connections then replace the valve back on the chassis clip then thread the pipes up behind the steel clutch pipe checking you're happy that they are not fouling any moving parts
Duly Noted - I like simple Fixes http://www.pistonheads.com/gassing/topic.asp?t=143...
Check your fuel line isn't rubbing through on the engine cover whilst your there.
if your changing the heater hose and you get a genuine replacement set from the fish remove the bulkhead ends first then unclip the control valve from the chassis leg (just pulls out of c shape spring clip ) then you can pull the whole thing up out of the engine bay to remove and replace the other connections then replace the valve back on the chassis clip then thread the pipes up behind the steel clutch pipe checking you're happy that they are not fouling any moving parts
Edited by L2VXR on Friday 1st July 08:39
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff