Monaro VXR boot closing
Discussion
snowwolf said:
If you could measure the from end to end where the cups pop on, when removed from boot, I will see if I can match them up with ones I have, not promising I can get them but worth a try, and they will be free and brand new.
Thanks for the responses guys,sounds like they are gone then. Snowwolf thanks for the offer very kind of you I will try and measure them tomorrow or over the weekend and let you know. BlueDevil said:
Thanks for the responses guys,sounds like they are gone then. Snowwolf thanks for the offer very kind of you I will try and measure them tomorrow or over the weekend and let you know.
Worth a try for sure, if you can take a photo too and measure the diameter, If I have a couple that match up give them a try, I might not but have quite a few to choose from snowwolf said:
BlueDevil said:
Thanks for the responses guys,sounds like they are gone then. Snowwolf thanks for the offer very kind of you I will try and measure them tomorrow or over the weekend and let you know.
Worth a try for sure, if you can take a photo too and measure the diameter, If I have a couple that match up give them a try, I might not but have quite a few to choose from Sohlman said:
I bought some from eBay for around £20 that claimed to be heavier duty when compared to standard. Work really well and hold the boot until it's half closed. No more finger chopping moments.
Will try and find the receipt and contact details.
Can you post up the details...? Mine need doing too and I'm starting to think that I'm going to keep the Monaro and not move into a R8 so might as well keep spending Will try and find the receipt and contact details.
http://www.sgs-engineering.com
Having looked up my paperwork these are the guys I bought mine from. On a year now and still great.
They can also tune up or down the pressure
Having looked up my paperwork these are the guys I bought mine from. On a year now and still great.
They can also tune up or down the pressure
This thread might help, I have the same problem last year and SGS sorted some out for me.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Melchett said:
This thread might help, I have the same problem last year and SGS sorted some out for me.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Thanks chaps - have contacted SGS to see if I can get the same albeit uprated... perhaps 850N so that the boot pops open.http://www.pistonheads.com/gassing/topic.asp?h=0&a...
BlueDevil said:
Snowy
I sent you another message but it looks like you didn't get that one either, I don't know why never had issues before. Can you pm me and see if that works
Thanks
I have sent a couple to you and nothing is coming through from you, I have always had my doubts about this PM system direct to wuulfy at g mail .c omI sent you another message but it looks like you didn't get that one either, I don't know why never had issues before. Can you pm me and see if that works
Thanks
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff