Discussion
j666eds said:
Hi,
I have done some research, but just want to make sure before i bite the bullet, will these fit :
19" 8.5"
5x120
ET45
Will fit 245/35/19 tyres. The car is on coilovers.
Thanks
based on this calculator, the rim will stick out 9mm further.I have done some research, but just want to make sure before i bite the bullet, will these fit :
19" 8.5"
5x120
ET45
Will fit 245/35/19 tyres. The car is on coilovers.
Thanks
http://www.wheel-size.com/calc/?wheel1=245-40-18X8...
One way to check is to fit some cheap spacers which work out to 9mm or even washers just for a check. then jack the wheel up
I personally think that you can make them fit but you may need a minor arch roll
When i checked mine which are 18x10 +50 on the rear, they will fit with a minor arch roll and a 265 tyre, or a full roll and a 285 tyre
My front rims are 18 x 8.5 +47 and they should fit with a 245/40/18 and maybe a very minor roll or a set of offset top mounts
I hope this helps
You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.
What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
Phillphill said:
You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.
What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
That looks really nice, good job What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
Personally I'd want the rear raised maybe 5 or 10mm possibly as it just looks a tiny smidge too low at the back for my taste and I like a slight rake, but the wheels work surprisingly well on the car
Phillphill said:
You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.
What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
brought them already, should be here tomorrow. They are Borla ZZR's. Thanks for that info, hopefully they should fit!What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
Thanks
Phillphill said:
You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.
What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
Have you altered/modified the arches? Nice set up, they look lightweight.What wheel is it you are looking at?
Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.
Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff