Forced Induction Interchillers
Discussion
Very tempting: http://www.hsvforum.com.au/showthread.php?14833-Fo...
S800VXR said:
MF are doing something for 007..... still? I looked into it but its allot of work with little benefit in Blighty, Texas maybe.
Good for drag racing as you can sit in line and not heatsoak the engine And after logging IAT2 recently, it does get rather warm under normal use. eliot said:
FORD patented this idea years ago. Whilst I can see how it works for a single pull or drag run, I suspect it would become in-effective on subsequent runs (in terms of recovery time)
Recovery is pretty quick actually, have been following along on the original build thread and he seems to know his st. R8VXF said:
S800VXR said:
MF are doing something for 007..... still? I looked into it but its allot of work with little benefit in Blighty, Texas maybe.
Good for drag racing as you can sit in line and not heatsoak the engine And after logging IAT2 recently, it does get rather warm under normal use. S800VXR said:
R8VXF said:
S800VXR said:
MF are doing something for 007..... still? I looked into it but its allot of work with little benefit in Blighty, Texas maybe.
Good for drag racing as you can sit in line and not heatsoak the engine And after logging IAT2 recently, it does get rather warm under normal use. R8VXF said:
Very tempting: http://www.hsvforum.com.au/showthread.php?14833-Fo...
won't this invalidate your VX UK warranty, or have you done that already with other Mods kaw said:
Been looking at this for some time i was waiting for the fish to sort thiers out but had a chat with roger and hes shelved the idea so looking to get one from the states know
Reading through what this chap has gone through with the kits from the states, I wouldn't bother with them, they are particularly shoddy. This kit is as sweet as pie though.R8VXF said:
kaw said:
Been looking at this for some time i was waiting for the fish to sort thiers out but had a chat with roger and hes shelved the idea so looking to get one from the states know
Reading through what this chap has gone through with the kits from the states, I wouldn't bother with them, they are particularly shoddy. This kit is as sweet as pie though.wav8 said:
Have a word with Moif he may be able to help.;)
I've had mine on my car for 18 months now and it does the jobWhen I fitted mine myself they were new to our type of cars in this country so there were a few snags on the installation due to were to fit the chiller unit itself due to its size,but with a bit of mechanical knowledge its doable
I wired mine up so I have AC in the cabin and have a bypass switch so you can bypass the intercooler at the front of car
I have seen my IAT's as low as 19C reduced from 52C within 2 minutes,when driving with chiller on temps are around 28C depending on ambient temps but this can be reduced by 5C if using the bypass system
The kit I used was RX Superchiller
This is where I got mine from....
www.badcatjagupgrades.co.uk
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff