Rover V8 inlet manifold

[WLAcopilote]

Any body out there KNOW what the arrangement is for which carburetter feeds which on a STANDARD rover V8 inlet manifold?

I think it is as follows each carburetter feeds the pair of cylinders inder it and the outer two on the opposite bank.

I did "know" this as I squirted WD40 through it when it was off the engine but now I've gone and confused myself!

I'm setting up the mixture on my SU's by pulling the plugs and number 1-4-6-7 are a bit lean....

cheers!
WLAcopilote

[greenv8s]

Judging by the outside appearance, I would say you're correct.