MGB ignition timing.

Author
Discussion

huntsman

Original Poster:

8,206 posts

257 months

Tuesday 16th September 2003
quotequote all
I'm too tight to buy a manual, does any one know (or can read from the manual) how many degrees ignition timing is on a mgb 1.8 if I want to use unleaded and what should the points gap be? bout 25 thou?

lee02

378 posts

258 months

Friday 3rd October 2003
quotequote all
IIRC it's been a few years
static 6 btdc for unleaded 8 for leaded
.64mm i used to do mine visually just make sure the gap is not to small or it will run like a dog remember to lubricate lobs on spindle or the points will close up. hope that helps

Pigeon

18,535 posts

253 months

Saturday 18th October 2003
quotequote all
The plugs gap should be about 25 thou, the points 12-15 thou. Timing: start around 8btdc, find a hill where you can floor it in 4th at around 35mph without accelerating very much. If it pinks under those conditions, back it off a tad; if it doesn't, bring it forward until it's just about to.

MGBV8

160 posts

263 months

Saturday 18th October 2003
quotequote all