Tuning - mixture
Discussion
Yeah that nut just sets up the position of the needle jet, usually for idle mixture, by raising or lowering the jet.
The actual metering is determined by the taper on the needle and its jet.
Unless you really want to play around with that, the only option is to adjust the nut for idle mix.
If the cars standard that is.
The actual metering is determined by the taper on the needle and its jet.
Unless you really want to play around with that, the only option is to adjust the nut for idle mix.
If the cars standard that is.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff