New Master Cylinder Clutch & Brake

[phil350]

Can any one either give me Girling part numbers for the above or tell me from which model of car they were originally sourced for a 350 Wedge?

[number 7]

Phil, you might want to try asking in the Wedge forum. I'm not entirely sure myself, having tended to source bits from TVR indy's such as Tower View. I've got suspicion that you need to be careful with the master cyl. actuating rod, as some people supply the wrong one. The rods themselves can also get bent, because of the less than ideal installation angle. The slave "might" be SD1, but check the Wedge forum, or www.tvrwedgepages.co.uk/

7.