Custom made cams
Discussion
Anyone know if this is relativelly easy to get done or of cost.
I ordered some cams 1.5yrs ago and despite sending the cheque at the time I still dont have them.... I'm getting to the stage were I am thinking I may neeed to do my own thing.
I can get mine reprofiled quite cheaply by Kent cams but this will not increase the lift so I am wondering if I can get one made up.
The trump card is that my heads are the same as the old 2.5L M20 BMW so I may be able to get a high lift cam kits for that car.... however one of my heads is odviously reversed so I would need the other made from scratch!
any ideas?
I ordered some cams 1.5yrs ago and despite sending the cheque at the time I still dont have them.... I'm getting to the stage were I am thinking I may neeed to do my own thing.
I can get mine reprofiled quite cheaply by Kent cams but this will not increase the lift so I am wondering if I can get one made up.
The trump card is that my heads are the same as the old 2.5L M20 BMW so I may be able to get a high lift cam kits for that car.... however one of my heads is odviously reversed so I would need the other made from scratch!
any ideas?
I had a custom ground cam ground (Spec. by JW Developments) it was groung by Kent on a new blank, to my great suprise there was no additional charge for it being a custom profile as they charged for the blank + a fixed charge per lobe ground (V6 - 12 lobes)
delivery time was about three to four weeks, could of been quicker but I was in no rush.
Regards,
Chris.
delivery time was about three to four weeks, could of been quicker but I was in no rush.
Regards,
Chris.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff