bike power shifter help
Discussion
new member,,,,,,,,,,need some help if possible.
i would like to put a electronic shifter set up on a 1989 van dieman (yamaha r1) power.
any suggestions for shifting the arms forward and back via buttons on the steering wheel?
any help appreciated.
would a starter solinoid work?
located in canada.
thanks gord
>> Edited by lotiguy on Monday 30th January 17:07
i would like to put a electronic shifter set up on a 1989 van dieman (yamaha r1) power.
any suggestions for shifting the arms forward and back via buttons on the steering wheel?
any help appreciated.
would a starter solinoid work?
located in canada.
thanks gord
>> Edited by lotiguy on Monday 30th January 17:07
We used a Translogic Powershift system on our 2004 FS car. It was pretty reliable once it was set up.
We had intended to use it on the 2005 car too, with a manual backup. However, still having to use a foot clutch meant that it proved simpler (in terms of manufacture and for driving) to use the stick shift.
HTH
We had intended to use it on the 2005 car too, with a manual backup. However, still having to use a foot clutch meant that it proved simpler (in terms of manufacture and for driving) to use the stick shift.
HTH
lotiguy said:
would a starter solinoid work?>> Edited by lotiguy on Monday 30th January 17:07
Unlikely its only designed to operate in one direction with a spring return.
You need to determine how much the maximum force is required to change gear and base your solenoid selection on that.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff