ROVER V8 GROUP A ROCKER ARMS

[topsparks]

Does any one know what Volvo these ajustable arms came off?,as I need to get hold of 8 as the Twin plenum Vitesse I bought only had them fitted to one bank!.I am also short of the steel posts and push rods if any one has any spare I would be very interested .I have spoken to John Eales and he has a few bits but I thought I would ask you guys first.

[boosted ls1]

I'm pretty sure the adjustable rocker arms were from a 144 volvo. What shaft diameter do you hav? Are your pushrods hollow? As for the rocker posts then some of the old buicks/olds had steel posts iirc. Pushrods can be cut to length. If you draw a blank I may be able to help.

Boosted.

[GreenV8S]

Tim Lamont was talking about selling a set at one point, might be worth a call?

[v8 jago]

I know of someone who is selling some. He want about £130 for the pair. If you are intrested let me know and i will get in touch with him.

[rev-erend]

Tim Lamont had a set for sale in the classifieds.. maybe he still has them ?

[topsparks]

V8 jago YHM

[topsparks]

I have spoken to Tim a few months ago and he sold them to a mate.
Mike,the shafts are 22mm in diameter and the steel posts are 50 mm high the push rods are solid,but with a different end so that the ajuster ball will sit in it.I do have a pair of shafts that are worn,I don't know if you can get them hard chrome plated to take them bake to the correct size.
I also hear that you know how to stop LS6 front pullys falling off and setting your Chim alight !!!,regards James.

[boosted ls1]

topsparks said:

Mike,the shafts are 22mm in diameter and the steel posts are 50 mm high the push rods are solid,but with a different end so that the ajuster ball will sit in it.I do have a pair of shafts that are worn,I don't know if you can get them hard chrome plated to take them bake to the correct size. I also hear that you know how to stop LS6 front pullys falling off and setting your Chim alight !!!,regards James.

James, did you call me earlier, try lunchtime tomorrow

Nobody here fits those ls6 pulleys properly. I've had to fit quite a few that fell off and they were fitted by well know firms!

Boosted.