Lucas 14cux Wiring...

[Graham]

I think I've managed to work out the wires i need to connect on the chim loom i've stuffed in the tuscan?

anyone care to comments

There are two connectors a brown one and a white one. on my chim they are tucked right behind the dash so i can't get them apart to run a metre across them.

This is what i've worked out so far

(pls correct me if im wrong)

Relays

Only 2 of the relay connector blocks are used for the main relay and the fuel pump relay. The other 3 connectors are left empty

The fuel Pump Relay should click in and out the main relay has a delay.


Ta


G



Small White Connector

This is the ECU Diagnostic Socket


4 Pin Black Socket

Not used left Empty



Brown Connector

Brown/Green : 20A +ve Ignition switched Feed (IN)
Purple/White : 15A +ve Fuel Pump Feed (OUT)
Brown/Red : Starter Solenoid (IN)
White/Green : +ve Ignition Feed (Constant) (IN)




White Connector


White/Slate : Alt Exciter wire (if alt has more than 2 wires)(IN)
White/Brown : Oil Pressure Switch (OUT)
White/Violet : Inertia Switch ( maybe not needed) (OUT)
Brown/Yellow : Ignition Light (OUT)



Engine Bay Black Wires


Black Wires = Earths. Earthed to the Inlet Manifold