993 engine problem
Discussion
Have no experience of newer 911's, but am guessing the basic architecture is the same as older ones. There are 2 relatively common things it could be (other than belt) occasionally the fan rubs against the metal surround - should be obvious metal/metal rubbing if that is the case. More common is the alternator, which on the older cars is run off the same shaft as the fan. If the bearings in the alternator are on the way out, this would make the noises you describe.
hth,
Matt
hth,
Matt
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff