Ever Removed PPF?

[oo7ml]

Hi,

I’m think of removing the PPF that is on my Huracan. The previous owner had it applied and I don’t think it’s a great job.

I would prefer the car to be in it’s full natural paint.

Each to their own, but for me, life is too short to be worrying too much about stone chips. I’m much more concerned about keeping the mechanical condition of the car in good order.

The PPF was applied as stencils around each part of the car, so no doors or wing mirrors need to be removed.

I presume a PPF / Wrap Installer would be able to remove this quote easily without damaging the car? I don’t think it would be wise to go at it myself.

[davek_964]

I had a PPF panel replaced a month or two after I had mine done. Wouldn't dare do it myself, but basically seemed to involve a heat gun and lots of water - pretty simple for the professionals.

[Composite Guru]

Professionals use a steamer. Don’t use a heat gun, you may burn the paint.

Watch this first to get the idea.

https://youtu.be/ttWDiUL7lTw

Edited by Composite Guru on Thursday 17th December 07:50

[davek_964]

Ah yes, steamer. My memory isn't as good as it used to be

[Duncan_autoshine]

It's fairly straightforward to remove but I would advise a professional.
Unlike a lot of Wrap vinyls it's very rare for it to leave adhesive behind on the panel, removal from a full car should take around half a day.

[BlueIn2Red]

It's an easy job if you do a bit of research and take some care.

However, there is always the possibility of paint being lifted as the PPF is removed, no matter how careful you are. So be aware of the risks, worst case it could turn out to be a very expensive decision!

[Holgate86]

I've recently ordered a new GR Yaris for delivery next year.

As you may or may not be aware the roof of the car is forged carbon covered with a carbon fibre wrap, there is a discussion on the GR Yaris owners forum about stripping the carbon fibre wrap and polishing the forged carbon below it. As shown below.



Any comments or issues regarding removing the wrap, or polishing the exposed forged carbon would be gratefully received.