Dead Speedometer/Odometer
Discussion
Mine went earlier this year.
If its the speed transducer (sensor) then it costs 50 quid from TVR and is straightforward to fit. Jack the car up at the back, pop it on axle stands, undo one electrical connector and it screws off. You'll need a few cable ties, an adjustable spanner and some patience.
TVR say the clearance from the transducer to the cog on the diff should be 1mm. Basically put it as close as possible without it catching but not more than 1mm.
Phil.
If its the speed transducer (sensor) then it costs 50 quid from TVR and is straightforward to fit. Jack the car up at the back, pop it on axle stands, undo one electrical connector and it screws off. You'll need a few cable ties, an adjustable spanner and some patience.
TVR say the clearance from the transducer to the cog on the diff should be 1mm. Basically put it as close as possible without it catching but not more than 1mm.
Phil.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff