Passenger door switch..

[davidd]

The internal one is dead, the outside one works.
I've unplugged the control boxes, wiggled the connectors and put them back. No joy there. I don't want to take the door to bits as I bet it will start to leak, is there anything else I can check first?

TIA.

D.

[oliverkelly]

Taking the inner panel off the door will not make the car leak any more than it probably does already. But that is likely where the problem lies.

There is a connector that has probably got corrosion on that can be easily cleaned inside the door.

[VYT]

I have had a couple of connections gone bad inside of the drivers door. I agree with the previous post, problem is likely a connection or the switch, (you can get them from RS). Removing the inner door panel is easy, don't think you should worry about causing a leak.