Cerbera boot badge

[TVR_Tyler]

So I have taken my boot badge on, what companies still do badge enamelling and do you know where and if you can buy the springs that’s go between the body and the badge?

[flyingdutchie]

On y car there are rubber grommets between the badge and body.

[ukkid35]

It's important to get the badge refitted correctly, if the spring tension is wrong the boot will open when going over bumps

[Robscim]

Definitely what Paul says about the adjustment of it.

Now, don't shoot me but my badge needed doing last winter and I stuck a gel sticker on it as a temporary measure (from ebay) until I got it fixed (following advice from a fellow TVR owner). Well, what was to lose at £6 a throw?

Low and behold, unless you're an aficionado, I defy anyone to tell the difference from more than about a few feet away!

It's obviously not as good as getting the original done properly, but for £6, you can spend the difference on fuel!!

Ironically, they originally sent me one for a Chimaera 4.5!!!! Oh the shame!!!

Cheers

Rob