4.0L MBE ECU Pinouts

[Ryan Griffiths]

Does anybody have the ECU Pinouts for the Later MBE Ecu's used on the 4.0L Speed Six.



Thanks for your time

Ryan

[froggie]

The 3 colored tops,i have some info "God knows where, but he wont tell me."

but try the tamara, 350, sagaris lads as its same style as theres. id assume pins are same ( gold analogue type dash as in convertable and mk3? tuscan} total different harness / fuse box etc, to "Tuscan"
Intresting question, may i ask what your up 2?

Edited by froggie on Monday 20th September 00:47

Edited by froggie on Monday 20th September 18:31

[dvs_dave]

I'm pretty sure all Speed 6 Engined cars have the same ECU loom so try any of the relevant forum sections (Cerb, T350/Tam/Sag, Speed 6 Engine) for info.

With regards what he's up to, see here.
http://pistonheads.com/gassing/topic.asp?h=0&f...

Edited by dvs_dave on Monday 20th September 18:41

[nrick]

Where is engine ecu located?

[nelly1]

dvs_dave said:

I'm pretty sure all Speed 6 Engined cars have the same ECU loom...

Nope - the early ones had a single 55 way plug thus:



Don't know if the MBE site... will be of any help?

[Ryan Griffiths]

2 Types of Ecu connectors for Speed Six

Single Plug 55pins

Three Plug 104pins

Have Pinouts for both now which will post up in an more easy way to understand in the next few days as i have the Loom drawings from TVR which are abit confusing in some areas.

[nelly1]

Ryan Griffiths said:

2 Types of Ecu connectors for Speed Six

Single Plug 55pins

Three Plug 104pins

Have Pinouts for both now which will post up in an more easy way to understand in the next few days as i have the Loom drawings from TVR which are abit confusing in some areas.

Ryan

I devised the earlier (55pin) ECU schematic that can be seen on the various forums.

I can forward you an updated Excel copy if you wish.

Neill

[froggie]

nrick said:

Where is engine ecu located?

drivers kick well just pull thre carpet from the door a pillar.
dash ecu is in there too

[nrick]

Thanks

[Ryan Griffiths]

Sorry about the delay

http://www.mediafire.com/?5uizg78zogvz6d3

[dvs_dave]

As the ECU has pinouts for a cam sensor is it not possible to just fit one and then reconfigure the existing ECU for sequential injection?

[Rufan]

Dear Ryan,

The link in previous post is not working anymore.

Do you still have the pinouts for the 3plug Tuscan S MBE ECU?

Many thanks