Code "O"

[T88CAN]

Every time i turn on the ignition code O has join my code E problem, now i know it is "no communication between annologe and control" What the bl###y hell does this mean and how can get rid!!Tony

[TUS 373]

Tony,
Code 'O' pops up on my car every time it is started - I believe it does on all of the cars with earlier software. What it means? Dunno really. As far as I know it it just something the car throws up for a split second as it goes through its initialisation sequence operating all of the senses one by one. It it is completely normal and safe to ignore (on start up).

I note that if I get into my car, shut the driver's door, and turn the ignition on quickly - it tells me the door is still open for a split second. I think the cars are just a little slow sorting themselves out when switching on the ignition!

Don't worry!

[Mr Freefall]

Tuscan Dashboard Diagnosic Codes

A - Speedo not activating zero switch/switch failed/open circuit
B - Speedo not releasing zero switch/switch failed/short to earth
C - Water not activating zero switch/switch failed/open circuit
D - Water not releasing zero switch/switch failed/short to earth
E - Fuel not activating zero switch/switch failed/open circuit
F - Fuel not releasing zero switch/switch failed/short to earth
G - Water temperature sensor input open circuit
H - Air temperature sensor input open circui
I - Oil temperature sensor input open circuit
J - Oil presure sensor input open circuit
K - Fuel level sensor input open circuit
L - Erratic road speed signal input
M
N
O - No communication between analogue and control up


I get O all te time for a split seccond

[St George]

Mr Freefall said: Tuscan Dashboard Diagnosic Codes

A - Speedo not activating zero switch/switch failed/open circuit
B - Speedo not releasing zero switch/switch failed/short to earth
C - Water not activating zero switch/switch failed/open circuit
D - Water not releasing zero switch/switch failed/short to earth
E - Fuel not activating zero switch/switch failed/open circuit
F - Fuel not releasing zero switch/switch failed/short to earth
G - Water temperature sensor input open circuit
H - Air temperature sensor input open circui
I - Oil temperature sensor input open circuit
J - Oil presure sensor input open circuit
K - Fuel level sensor input open circuit
L - Erratic road speed signal input
M
N
O - No communication between analogue and control up


I get O all te time for a split seccond

These are great. I have had an "l" code - so what does it actually mean.

[21tvr]

A lot of this stuff is here on the FAQ's, most of these questions have come up before - i'm not saying don't post them - you need to know!

Do have a good trawl through the FAQ pages first though!

best of luck

Simon