TVR Tuscan Mk2 Indicator arm not switching offside
Discussion
Hi
Looking for some advice, the indicator arm doesn't operate the offside indicators, the lights function n normally on hazard and left turn is fine, but no indicators or tell signal, in fact nothing when I indicate right, presuming a problem on cabling at stalk, any advice on repair/replacement would be appreciated, not really sure where to start
Richard
Looking for some advice, the indicator arm doesn't operate the offside indicators, the lights function n normally on hazard and left turn is fine, but no indicators or tell signal, in fact nothing when I indicate right, presuming a problem on cabling at stalk, any advice on repair/replacement would be appreciated, not really sure where to start
Richard
It's been discussed before: https://www.pistonheads.com/gassing/topic.asp?t=12...
Could be the stalk, could be the pod, and the advice seemed to be - try electrical contact cleaner as a first step.
The indicator stalks are just Ford parts with or without a metal cover, depending on the model.
Could be the stalk, could be the pod, and the advice seemed to be - try electrical contact cleaner as a first step.
The indicator stalks are just Ford parts with or without a metal cover, depending on the model.
The mk2 indicator stalk is a TVR in house part I believe, two micro switches for left and right, they are tiny and fragile, I’d start here. With a little fiddling of the leather you can just about see them, make sure it is making contact when lever operated. They can be replaced for sturdier ones used else were in other TVR’s.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff