Hello look at photos please

[TonyOxford]

Hello All
I'm hoping to put silicone hose all round and polish up the two tanks but?

What is the size of the spaners I need for the oil cooler and the big tank please and are they hard to take off?

[TonyOxford]

Who would be the best people to get the blue silicone Kit hoses from? And what size spanner do I need for this is it glued on I tried grips and it's not moving

[porterpainter]

Can’t help with the spanner sizes, but I bought my hose kit from Powers. I went for the black ones, as I don’t have a blue car or rocker cover

[wily_coyote]

Or you could go down this route....

While you're in there, service the oil cooler and clean the additional gauze filter in the top inlet of the oil catch tank ;-)

[m4tti]

Have you got the hoses to release Tony?

[TonyOxford]

Hello were is the best place to get them 4 oil pipes with the blue and red on or can one get the pipes with braided hoses and no coloured ends who would I get them from?

[phillpot]

TonyOxford said:

And what size spanner do I need for this is it glued on I tried grips and it's not moving

It will be tight, you'll make a mess of it trying to use grips!

Cut a "spanner" from cardboard, measure the width of the gap now go and buy a spanner that size.

Or buy one of these . . .

https://www.amazon.co.uk/Electronic-Micrometer-Hou...

[glow worm]

TonyOxford said:

Hello were is the best place to get them 4 oil pipes with the blue and red on or can one get the pipes with braided hoses and no coloured ends who would I get them from?

TVR Power all stainless braided ... about £500 IIRC

Editted:-
Here they are:- https://powersperformance.co.uk/store/slug/SS-HOSE...

Gone up a bit in price nearly £700 now

Edited by glow worm on Saturday 1st October 20:10

[mk1fan]

Elmswood got mine from Pirtek. Just take your old ones in. Seem to recall there being an alternative routing of the pipes to eliminate the chaffing.

[Sagi Badger]

OP, Tony, you have mail from me
J