Mk1 Tuscan S - What are these wiring connectors for?

[Ben-TuscanS]

Hi guys and gals, new here with my lovely Tuscan S

The radio head unit in it was total junk when I received it, plus a previous owner had installed a DAB receiver in the boot but radio it came with doesn't even support that receiver, so the DAB function is not available.

I'm running the DAB antenna cable back to the dash for the new radio install and came across these 2 connectors behind the driver side speaker. The wires go towards the front rather than towards the boot.

Everything is working OK, lights, door switches etc, and there is no power on any of the terminals so they are probably for extras that were not fitted.
The wiring diagram says Green/White is probably the R/H indicator, but they work OK.

Just curious, but any ideas?




Cheers all,
Ben

[blueg33]

Ejector seat I think.....

Or if your electrics are all working its the connection for the random electical fk up module. I believe this was absent on later cars

[Basil Brush]

Maybe for the high level indicators on non-S cars, if they used a standard loom for all Tuscans?

[Ben-TuscanS]

blueg33 no EFU module on mine! Such a relief!

Basil Brush That sounds possible, the colour coding would suggest it is something to do with lights.

[blueg33]

Ben-TuscanS said:

blueg33 no EFU module on mine! Such a relief!

Basil Brush That sounds possible, the colour coding would suggest it is something to do with lights.

The EFU module on mine worked perfectly.......