How do i take this apart

[Tonymg]

where do I cut? or cut in another place?

[Tonymg]

any one had there can apart?

Tony...

[m4tti]

What you trying to do Tony. The first pic the arrow is pointing to a sleeve in the can, that would need tapping out.

[Tonymg]

just trying to take it all apart so I can may be put newer outer carbon lining on/in and sort out the dints on the end cap

have you done this or any one ?

[Oneball]

I’ve got a banged up one in the garage. It looks like the inlet cone is glued on and the oultet cone is welded to the pipe.

[nawarne]

In original picture, the sleeve definitely looks continuously welded onto the end cap.

The 2 'end' caps are just glued/RTV'd onto the carbon body. So, with a bit of careful tapping and cutting with a Stanley knife, you should be able to expose the sound absorbing wadding. Under this will be the perforated pipe joining the 2 end caps.

IIRC, you will need to cut the sleeving, rather than trying to grind & chisel the sleeve weld.

Nick

[Tonymg]

Thanks Guys will post more photos when done...