oil pressure sender

[mongoose]

can anyone tell me what oil pressure sender they use on the tuscan please(ie ford escort,vauxhall nova etc.).ive just had mine replaced due to a leak and now have half the oil pressure at idle that i used to have!! id like to source one through my local motorfactors so i can be sure of buying the correct one(my new,low reading one,was supplied by tvr).

>>> Edited by mongoose on Friday 19th November 15:04

[mongoose]

anybody,pretty please!

[YAHOO]

If you have a new sender you just need to get very small screw driver and turn screw on side up 1/4 turn. I no it sounds mad but thats what i do and TVR . TVR at its best :-)

[mongoose]

couldnt elaborate on that could you please(pics or somesuch)i didnt even know there was a screw on the sender!!-cheers-mv

[YAHOO]

Remove air box, sender is under lower part of air box fixed to body of car you may find it easy to take two screws out that fix it to the body. There will be a hole on top or side of unit, there should be a hex screw or small flat edge screw turn this in very small amounts till you reach say 25psi idle and 45-55 psi at 5000rpm. Also remember to keep air flow sender on air box connected when running.

[mongoose]

cheers yahoo,ill give it a go.