URGENT - How do you get the shelf off on a Tuscan?
Discussion
There are 2 screws at each end of the shelf going in to the metal brackets, a 13mm bolt running under the headunit in the tunnel trimming.
As mentioned there before you will need to make a cut in the shelf in order to be able to remove it, best way I found was to use a hacksaw blade - took about 30 seconds.
Remove the dash top (2 hidden bolts one each end) and remove the top of the pod, lower the steering wheel to make access to the rear of the shelf easy.
Once cut its just a case of wiggling the shelf free.
The real fun starts when you have to get it back in.
Good luck
As mentioned there before you will need to make a cut in the shelf in order to be able to remove it, best way I found was to use a hacksaw blade - took about 30 seconds.
Remove the dash top (2 hidden bolts one each end) and remove the top of the pod, lower the steering wheel to make access to the rear of the shelf easy.
Once cut its just a case of wiggling the shelf free.
The real fun starts when you have to get it back in.
Good luck
Gassing Station | Tuscan | Top of Page | What's New | My Stuff