Windscreen lower trim?
Windscreen lower trim?
Author
Discussion

ILoveMondeo

Original Poster:

9,614 posts

242 months

Saturday 10th August 2013
quotequote all
Whilst having a tinker and polish today I noticed the windscreen lower rubber trim was looking pretty jaded and was very crumbly and fally-aparty due to heat.

Can I replace just the lower trim? Looks like it should be a fairly easy job one the old one is peeled away and the old gunk cleared out.

Searched around a couple of the online parts sites (racing green and clever trevor) but couldn't find the right bit (there was trim for other TVRs but not tuscan)...

Could someone kindly point me in the right direction for the trim and what I should be sticking it back on with?

Thank you kindly!

Dave

ILoveMondeo

Original Poster:

9,614 posts

242 months

Sunday 11th August 2013
quotequote all
OK, so I've found what I think is the right trim..

http://www.racetechdirect.co.uk/tvr-car-part-v1093...

Any ideas what to stick it back on with? Sikaflex?


330p4

668 posts

246 months

Sunday 11th August 2013
quotequote all
Dave I used black silicone sealant to reveal when I took scuttle off to do the valves
Ian

ILoveMondeo

Original Poster:

9,614 posts

242 months

Sunday 11th August 2013
quotequote all
Thank you! Have just ordered some!

Got a day of work this week so will spend a few hours sorting this, replacing the frazzled screen washers and seeing about loosening up the clamps on the cans!