Body off Tuscan

[anonymous-user]

Has anyone done a body off.
Thinking of some winter jobs extreme.

Is there a write up off a body off?

Thanks

David

[MPETT]

Yup, mine look for disassembly of Tuscan thread. It's involved but achievable. What's the purpose of removing it??

[Walford]

[ILoveMondeo]

I've been doing a bit of investigating into this recently, Im thinking that an interior retrim at the same time would probably make sense as so much of the interior needs to be pulled apart to get the body off. The. If you're doing that a full respraying to finish the job! Gets expensive quite quickly!

[kurtsti]

Do you have a floor plan or photo's of all the bolds I'm trying to get my body of my chassis and it seems to be stuck at the tunnel above the gearbox by I can't find any bolds around there


Cheers

kurt

[kurtsti]

Do you have a floor plan or photo's of all the bolds I'm trying to get my body of my chassis and it seems to be stuck at the tunnel above the gearbox by I can't find any bolds around there


Cheers

kurt

[kurtsti]

Do you have a floor plan or photo's of all the bolds I'm trying to get my body of my chassis and it seems to be stuck at the tunnel above the gearbox by I can't find any bolds around there


Cheers

kurt

[kurtsti]

Do you have a floor plan or photo's of all the bolds I'm trying to get my body of my chassis and it seems to be stuck at the tunnel above the gearbox by I can't find any bolds around there


Cheers

kurt

[kurtsti]

Do you have a floor plan or photo's of all the bolds I'm trying to get my body of my chassis and it seems to be stuck at the tunnel above the gearbox by I can't find any bolds around there


Cheers

kurt

[m4tti]

Is it not the same mounting points as demonstrated in the sagaris manual.

[kurtsti]

I've got the manual and there seem to be two below the dash but i can't find these


kurt

[MPETT]

There are 2 bolts hidden beneath the console/ bulkhead area. You have to cut 2 small holes to get at them.

Is the rectangular hole with the white glass fibre powder next to it.

Cheers
MPETT

[m4tti]

So with the engine and/or gearbox removed could you access them from below.

[Walford]

m4tti said:

So with the engine and/or gearbox removed could you access them from below.

NO you need to cut 2 windows more or less in line with screen pillow rear bolts

Edited by Walford on Friday 26th July 02:12

[m4tti]

So originally were they installed then glassed over once in place.