Porsche child restraint bar/buckle

[poon]

Hello All,

I purchased a Porsche childseat restraint bar/buckle from a fellow RS owner here in the UK. It didn't come with instructions but looking at it it seemed obvious that it fitted underneath the two front mounting bolts for the seat. So I did that, then located a plug under the seat and plugged it in.

All ok so far?

I turn on the ignition and the airbag light is illuminated constantly, I plug in a spare loose plug/buckle and the light stays illuminated.

The manual says that the light should flash for 60 seconds then go out!

BTW, the bar came with a loose plug so that I use non OEM child seats.

So not sure if all is ok or not??

Thought I would ask you learned chaps before asking the numpties at my local Porsche dealer.

[dava]

When I had one fitted at an OPC they made changes to the ECU. Guess that's your problem.

[jonny996]

Yip I had my indy fit mine, then I had to go to OPC for them to plug in there laptop to tell software that I had airbag deactivation unit fitted. 5 minute job.

If you click in child seat just now the airbag will be off, it is just the light that the software controls.