997 GT3 - which brakes?
Discussion
atomic said:
OK so I need to confirm my spec. Should I go for the ceramic brakes or not?
All comments gladly received.
Thanks
From a practical/performance point of view, if you're going to track it - no, if you're not - yes. All comments gladly received.
Thanks
From a residuals point of view maybe not. I haven't, and if I do feel I need better brake performance later on, a steel upgrade from one of the recognised specialists will cost me a lot less than speccing PCCBs
IMO.
Koln-RS said:
I think the latest PCCBs will be an attractive option on the 997 GT3, and could well retain some of their value in the used market.
It's cheaper to spec them and regret it, than to not spec them and regret it. If that makes sense.
It's cheaper to spec them and regret it, than to not spec them and regret it. If that makes sense.
it will cost you €12,000 to change them for steel... it costs €13,500 to add them later...
TEE said:
Koln-RS said:
I think the latest PCCBs will be an attractive option on the 997 GT3, and could well retain some of their value in the used market.
It's cheaper to spec them and regret it, than to not spec them and regret it. If that makes sense.
It's cheaper to spec them and regret it, than to not spec them and regret it. If that makes sense.
it will cost you €12,000 to change them for steel... it costs €13,500 to add them later...
I think those figures are wrong.
In the UK they are a £5800 option. A set of steels is what? £2k+?
Surely, to add PCCBs to a car supplied with steel brakes would be a lot more.
Geneve said:
TEE said:
Koln-RS said:
I think the latest PCCBs will be an attractive option on the 997 GT3, and could well retain some of their value in the used market.
It's cheaper to spec them and regret it, than to not spec them and regret it. If that makes sense.
It's cheaper to spec them and regret it, than to not spec them and regret it. If that makes sense.
it will cost you €12,000 to change them for steel... it costs €13,500 to add them later...
I think those figures are wrong.
In the UK they are a £5800 option. A set of steels is what? £2k+?
Surely, to add PCCBs to a car supplied with steel brakes would be a lot more.
Better check your facts otherwise you could have an expensive surprise...
PCCB's are a wonderful thing, but at a cost of £3500 per corner for replacement I suspect a lot of furute buyers will be put off at having them spec'd
Saw a C4S for sale recently. Looked fantastic in Atlas grey (superb colour btw)with PCCB's.
Irrespective of the spec, I wouldn't touch it because of the brake question!
Saw a C4S for sale recently. Looked fantastic in Atlas grey (superb colour btw)with PCCB's.
Irrespective of the spec, I wouldn't touch it because of the brake question!
C2DTG said:
PCCB's are a wonderful thing, but at a cost of £3500 per corner for replacement I suspect a lot of furute buyers will be put off at having them spec'd
Saw a C4S for sale recently. Looked fantastic in Atlas grey (superb colour btw)with PCCB's.
Irrespective of the spec, I wouldn't touch it because of the brake question!
Saw a C4S for sale recently. Looked fantastic in Atlas grey (superb colour btw)with PCCB's.
Irrespective of the spec, I wouldn't touch it because of the brake question!
The C4S would have had earlier generation PCCBs. Even so, there isn't a huge risk.
If the brakes are as good, and last as long, as claimed then you would have enjoyed the benefits of PCCBs.
If not, then you may have a justified warranty claim. Or, failing that, if you don't want to fork out for new carbon ceramic brakes, you just fit new steel brakes. That's the extent of the risk.
Koln-RS said:
I think the latest PCCBs will be an attractive option on the 997 GT3, and could well retain some of their value in the used market.
think you are right but this is a big negative against PCBB IMO, will retain 1k max of value so you are looking at £4800 or 83% depreciation.
I like atomic's spec and think the grey/yellow contrast you have specced inside and out will look great
but I would never spec PCCBs, as a second hand buyer I would pay little or no premium for them and would get them checked by a specialist thoroughly and if any hint of a problem would try to negotiate 2k off for steel replacement
think nav module will be more looked for on GT3 specs (as with all other 997's)
adam b said:
I think nav module will be more looked for on GT3 specs (as with all other 997's)
I was going to go for Nav but.....
1)I'll be doing 3000 miles per year and will know where i'm going when i'm out - car shows, drives round local area etc;
2) Update CD's cost approx £400 from OPC;
3) I'm intending keeping the car at least 5 years maybe up to 10 years - who the feck will be bothered about sat nav in 5 to 10 years everyone will have a tom-tom or similar or be able to purchase one for £50?!;
4) Costs £1921.
997gt3 said:
adam b said:
I think nav module will be more looked for on GT3 specs (as with all other 997's)
I was going to go for Nav but.....
1)I'll be doing 3000 miles per year and will know where i'm going when i'm out - car shows, drives round local area etc;
2) Update CD's cost approx £400 from OPC;
3) I'm intending keeping the car at least 5 years maybe up to 10 years - who the feck will be bothered about sat nav in 5 to 10 years everyone will have a tom-tom or similar or be able to purchase one for £50?!;
4) Costs £1921.
Fair comment. But discs don't cost £400. That was for the upgrade and new disc on the original 987/997s.
Still, I think the £2k for the nav might be better spent on the PCCBs. It is a GT3 afterall, not a gin palace.
Edited by Geneve on Tuesday 5th September 13:59
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


