boxster tech question- help please
boxster tech question- help please
Author
Discussion

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
this evening, i had to call out the AA for an undercharged battery. He advised me to give the car a 1 hour run, which i did. my guages also went AWOL when it was jumped, he advised me to disconnect and reconnect in the morning to hopefully regain them.

My problem- I disconnected the battery(no problem), but then closed the bonnet. With no power, how can i possibly release the bonnet to get back in to reconnect??

I have a 2.7 2001 manual, older shape

ThANKS in anticipation

martin

sportsandclassic

3,774 posts

248 months

Wednesday 31st May 2006
quotequote all
if no power jump point in fuse box (drivers footwell) then find the pull cord installed normally underneath o/s/f headlamp you may need to even remove the wheel and arch liner to get a good look for the release cable.

BliarOut

72,863 posts

269 months

Wednesday 31st May 2006
quotequote all
If you're on the jump point connected to a non running car or spare battery you can just open the bonnet as normal, surely?

>> Edited by BliarOut on Wednesday 31st May 22:00

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
sportsandclassic said:
if no power jump point in fuse box (drivers footwell) then find the pull cord installed normally underneath o/s/f headlamp you may need to even remove the wheel and arch liner to get a good look for the release cable.


thanks, just hAD a llok and a feel and to no avail, so i guess i will have to strip it out? IIRC the rear one(cable) is much easier to get to

BliarOut

72,863 posts

269 months

Wednesday 31st May 2006
quotequote all
Attach battery to cigarette lighter point and open bonnet.

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
bliar-

would i just do this using a jump lead on + terminal? sorry to appear blond but i am!!

sportsandclassic

3,774 posts

248 months

Wednesday 31st May 2006
quotequote all
yes plus sign on the red tag which pulls out in fuse box...negative onto the door check strap and then press the button...

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
but i will need another car for another battery to do this

sportsandclassic

3,774 posts

248 months

Wednesday 31st May 2006
quotequote all
yes or jump pack/battery with leads...

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
would the AA come out for that do you think?

BliarOut

72,863 posts

269 months

Wednesday 31st May 2006
quotequote all
Well it is flat and it won't start....

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
LOL, true. but i called them out tis evening too, i know they get arsey about similar probs regarding batteries

BliarOut

72,863 posts

269 months

Wednesday 31st May 2006
quotequote all
Any old battery will do to get you in.... Just attach it to the fuse board (preferrable) or cigarette lighter and open the bonnet as usual.

Edited to add:

Once you get in put the key in the ignition, switch off any accessories and turn it to position 1 before attaching the battery or your alarm will go beserk!

>> Edited by BliarOut on Wednesday 31st May 23:27

trekbiker

Original Poster:

9 posts

254 months

Wednesday 31st May 2006
quotequote all
my only solution will be to borrow work car, disconnect battery then do this, as car is on drive facing house, and no room either side

trekbiker

Original Poster:

9 posts

254 months

Thursday 1st June 2006
quotequote all
trekbiker said:
but i will need another car for another battery to do this


this was the chosen method for the AA guy!!