Bridgestone Potenza S02's on a 1988 3.2 Carrera Sport.
Discussion
I've just ordered Bridgestone Potenza S02's for the rear of my 3.2 Carrera. Have I done the right thing? Having read various forums I think I probably have but please tell me your experiences of this tryr on the back of a 1980'2 Carrera?
The car has the standard 6" & 7" Fuchs alloy wheels w/225/50-R16 ZR tyres on it just now.......
The car has the standard 6" & 7" Fuchs alloy wheels w/225/50-R16 ZR tyres on it just now.......
Martian O said:
Yes the SO-2 is a good tyre but it came out circa 1998! Surely there must be modern rubber that far exceeds 15 year old technology.
Though I do drive my car reasonably hard it doesn't see track days or abuse. I only average 2-3000 miles between MOT's so I am sure that the S02's will suit me just fine, thanks for your post though.cjb1 said:
Martian O said:
Yes the SO-2 is a good tyre but it came out circa 1998! Surely there must be modern rubber that far exceeds 15 year old technology.
Though I do drive my car reasonably hard it doesn't see track days or abuse. I only average 2-3000 miles between MOT's so I am sure that the S02's will suit me just fine, thanks for your post though.MogulBoy said:
Not directly relevant to the OP but I have found them to be very noisy in 255/40/17 format on the back of my Boxster so will avoid in the future.
So they will probably be OK on a proper Porsche then?
Just joking of course, that old chestnut 'aircooled & 911 vs The rest what-ho"
With a 40% sidewall profile they could well be noisier than a 50%. The noise of the air-cooled flat 6 will drown it out though, oops! There I go again.
Thanks for the post MogulBoy.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


