997 Tyre Pressure Sensors
997 Tyre Pressure Sensors
Author
Discussion

BalhamLotus

Original Poster:

282 posts

249 months

Thursday 7th June 2012
quotequote all
Apologies if this has been done to death, but I can't find anything in the search function.

I got a warning on my 997's tyre pressure sensor at the weekend. Lost something like 0.3 Bar in one tyre. Have pumped it up today and so far so good, but am concerned with Le Mans around the corner that I've got a slow puncture and it's going to get worse before it gets better.

Any advice?


Lancerlot

136 posts

228 months

Thursday 7th June 2012
quotequote all
Take a close look at the tyre surface to see if you have picked up a nail/screw or something. If not get the tyre re-seated at you local PC or tyre depot.

Popolou

1,262 posts

237 months

Thursday 7th June 2012
quotequote all
Mix up a soapy solution and spray it at the tire. Any leaks would turn up as bubbles on the surface.

Callughan

6,313 posts

222 months

Thursday 7th June 2012
quotequote all
TPS can be temperamental

DiscoColin

3,328 posts

244 months

Friday 8th June 2012
quotequote all
Callughan said:
TPS can be temperamental
But usually only if it is completely knackered... While the alarms can get over zealous, the pressures IMHO tell the truth unless you have found a way to burn them out (has happened to a mate who had to flex warranty on that one).

My advice would be to push the tyre to a few pounds over pressure and leave over night, then (so long as it isn't flat or anything) compare pressures at the same time of day to when you pumped it up. If it isn't close - straight to your tyre fitter of choice for further investigation. Repair if an option, new rubber if not.

[Note - if it is pancaked the day after - you will want to bin it regardless].

BalhamLotus

Original Poster:

282 posts

249 months

Monday 25th June 2012
quotequote all
Thanks for everyone's responses. It's been stable since it was re-inflated. Couldn't see any screws etc., so fingers crossed it was just a faulty reading....