Discussion
The only plans so far are too lower it a little on springs (not coilovers as this would compromise the car too much for daily driving) and maybe add some chassis under bracing, still researching this. I have an oem front lip spoiler on order. And also plan to change the front brake pads to something that will resist fade on track. Don’t fancy a silver lip on the wheels, as would then have to clean the brake dust off all the time.
Hello.
Sorry for the large bump, but i have a question to ask the owner of the black S2000.
I have a freind who is from switzerland, and has bought an S2000 after a couple of us guys on a different forum suggested he buys one. Anyway, the switz plates are much smaller than the british plates, so they dont fit the housing very well. Here is his car.
http://www.lfsforum.net/attachment.php?attachmenti...
Sorry for the dark pic, its all he has atm. As you can see on the front, the plate it much smaller than the housing. Is there anyway he can make this look abit neater, like cutting the housing down or something? Anything that would not have to get hole in the bumper or anything would be preferable. Thanks!
Sorry for the large bump, but i have a question to ask the owner of the black S2000.
I have a freind who is from switzerland, and has bought an S2000 after a couple of us guys on a different forum suggested he buys one. Anyway, the switz plates are much smaller than the british plates, so they dont fit the housing very well. Here is his car.
http://www.lfsforum.net/attachment.php?attachmenti...
Sorry for the dark pic, its all he has atm. As you can see on the front, the plate it much smaller than the housing. Is there anyway he can make this look abit neater, like cutting the housing down or something? Anything that would not have to get hole in the bumper or anything would be preferable. Thanks!
Edited by Frenchy0204 on Friday 5th June 23:18
jaik said:
The wheels and stance look great, but I'm not sure about the front splitter/lip, it looks a bit cheap because of the finish. It's the only bit I don't like, otherwise it's one of the best looking cars I've seen in ages.
Yep i'd completly agree. Needs spraying the body colour. Looks amazing though.Did you get the dent pulled in the N/S Front quarter panel? Can't see it in the new pictures.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff