1998 Impreza Type R version 4
Discussion
GH421 said:
My mate let me drive his type R...I broke 4th gear.
The early five-speeds can be fragile. Also worth remembering these are 25-year old cars that have been enthusiastically driven all their lives. Thankfully there is a healthy network of specialists offering offering affordable maintenance including gearbox rebuilds.GH421 said:
Few weeks later we had ring piston failure. Great fun but made of chocolate
Not if maintained well and mapped and fuelled properly.C70R said:
I've been carrying a torch for these for some time. What are good cars selling for these days?
Any Type R is £25k plus now, I’ve seen a few at £45k recently Fresh imports are £30k plus @ auction before you even consider getting them over here.
P1’s seem to be asking £40k-£60k atm
Imo I think it’s only a matter of time before there nearer £100k
Edited by Slammedorion on Wednesday 13th October 11:39
ChrisCh86 said:
That is lovely, the best thing this side of the 22B (or the P1).
What has been modified on it? (or more to the point, what hasn't been modified!
)
The current spec is awesome…What has been modified on it? (or more to the point, what hasn't been modified!

Engine
Ej22t cdb rebored to 97.5mm (2.35)
Rear thrust conversion
Manley 2618 forged pistons
Pauter I beam chro-moly forged rods
EJ257 STi modified crank
11mm ARP studs and bolts
Cosworth head gaskets
V4 STI heads
Supertech stainless inlet one piece valves
Supertech inconel exhaust one piece valves
Supertech titanium valve retainers
APi bronze valve guides
Prodrive rally cams
Kevlar cambelt
ACL race bearings
CDF lightweight vernier pulleys
CDF lightweight crank and power steering pulleys
API manifold spacers
AFP MD321t turbo
RCM oil catch tank with return to sump
Mocal oil cooler
API modified oil pump
Prodrive baffled sump
Bespoke rotated inlet manifold and intercooler pipes
Hybrid GT2 Spec front mounted intercooler
Walbro in tank pump with Bosch 044 inline pimp with swirl pot
API 740cc injectors
Carl Davey Insulated parallel fuel rails
Braided fuel lines
Fuelab FPR & gauge
NGK plugs
Samco water hoses
K&N Induction
GT Spec Tubular headers & uppipe – ceramic coated
mongoose 3” exhaust and downpipe
Simtek ECU mapped by Bob Rawle
Wheels & Tyres
Revolution Millenium 17” alloy wheels
Yokohama AD08R 215*40*17 tyres
Project Kics R40 wheel nuts
Brakes
AP Racing 6 pot calipers
Performance Friction 330mm grooved front discs mounted on bespoke Godspeed bells
OE 2 pot rear calipers
Godspeed 290mm grooved rear discs
Project Mu pads
Goodridge steel braided hoses
Transmission
Hawkeye JDM short ratio 6 speed
Carbon baulk ring upgrade
OE DCCD
Competition clutch – stage 4
Lightened flywheel
Chassis
BC Racing coilovers
Perrin 24mm rear arb
Perrin 22mm front arb
Perrin rear droplinks
Whiteline front droplinks
Whiteline roll centre adjusters
Perrin Anti lift kit
Noltec front top mounts
Whiteline adjustable rear arms
Summit rear strut brace
OE carbon front strut brace
Interior
Prodrive/Recaro Profi SPA carbon/kevlar front seats
Sabelt harnesses
Sparco suede dished wheel on works bell boss
Harness bar
Footwell mounted fire extinguishers
Phormula knock sensor
Two SPA dual gauges (monitor pressure boost and oil, temperature water and oil
Innovate wideband LM1 with XD16 gauge
Bespoke gauge mount on steering column
Flocked dash
Exterior
P1 splitter
Clear side repeaters
Clear indicators
PIAA front and rear wipers
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff