Fisher Fury, impuse buy!
Discussion
BrettMRC said:
Zephyr Speedshop said:
poppopbangbang said:
Beautiful bit of CAD (Cardboard Aided Design) there!
Looking forward to seeing the final version.
Can't beat the cardboard ![biggrin](/inc/images/biggrin.gif)
![biglaugh](/inc/images/biglaugh.gif)
![hehe](/inc/images/hehe.gif)
![biggrin](/inc/images/biggrin.gif)
I completely forgot I've also fitted this 2.2 or 2.4 turn quick rack. It was the over 3 turns. So taken abitnof getting used to be it's really nice not having to shift my hands even on the tightest turns.
![](https://forums-images.pistonheads.com/256708/202406282161383?resize=720)
![](https://forums-images.pistonheads.com/256708/202406282165623?resize=720)
Like everything on the fury, it's was easy Todo. Took me longer to measure and swap the tie rods over that were different to the ones on the car. The wheel is slightly off, so needs the alignment checking although I was very careful to find the center of the rack. But had the same issue when I did the bushes. The must be a minor difference in where it sits left to right.
Also I wasn't going to post any of these because of the wind noise. I need to go out with the foam thing on, or get a remote mic. But gives you an idea of how good she sounds!
Seriously considering booking a track day for it now . Especially as I know I can use the trailer for not alot.
Like everything on the fury, it's was easy Todo. Took me longer to measure and swap the tie rods over that were different to the ones on the car. The wheel is slightly off, so needs the alignment checking although I was very careful to find the center of the rack. But had the same issue when I did the bushes. The must be a minor difference in where it sits left to right.
Also I wasn't going to post any of these because of the wind noise. I need to go out with the foam thing on, or get a remote mic. But gives you an idea of how good she sounds!
Seriously considering booking a track day for it now . Especially as I know I can use the trailer for not alot.
BrettMRC said:
How loud is it? Will it be track day compliant?
Looks like it goes like greased weasel s
t off a shovel! ![biggrin](/inc/images/biggrin.gif)
With that 700mm x 150mm silencer I don't think it's too bad. It's all induction noise. Looks like it goes like greased weasel s
![](/inc/images/censored.gif)
![biggrin](/inc/images/biggrin.gif)
Reveire quote up to 5/6db drop in intake noise with there airboxes , I known mine won't be carbon. But I still think it will take a decent chunk off the noise level. I hoping. It will get rid of some of the lower throttle chuffing noise you get twitch itb's and carbs. But then yes I think it will pass a 95/100 day but will measure it beforehand to get an idea
Also been thinking about making a 45 or 90° slip on exhaust tip to point at the ground if it's still too loud
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff