FIA Historic Rules on Rubber doughnuts

FIA Historic Rules on Rubber doughnuts

Author
Discussion

over steer

Original Poster:

123 posts

213 months

Sunday 12th July 2020
quotequote all
The initial message was deleted from this topic on 13 September 2024 at 08:58

ChevronB19

6,375 posts

170 months

Sunday 12th July 2020
quotequote all
over steer said:
Hi Guys;

I was wondering if anyone had any idea if converting our 62 Lotus 23B from rubber doughnuts to CV joints would be compliant with FIA historic regs?

Thanks in advance.
I don’t, but best thing to do would be to check with an HSCC eligibility scrutineer.

HustleRussell

25,205 posts

167 months

Monday 13th July 2020
quotequote all
Such conversions are prohibited in Historic Formula Ford and also Formula Junior cars of the same period so I suspect it wouldn't be permissible.

Carnage

889 posts

239 months

Monday 13th July 2020
quotequote all
They’re not allowed, no.

Have to be as homologated in all respects.

If you’re asking because you have a Hewland MK9 box, you can get output shafts that allow you to fit donuts from PDS Racing.

They are beautifully made but not cheap.

Edited by Carnage on Monday 13th July 14:02

over steer

Original Poster:

123 posts

213 months

Monday 13th July 2020
quotequote all
The only motivation was greater reliability. Thanks for the information, will proceed accordingly.

HustleRussell

25,205 posts

167 months

Monday 13th July 2020
quotequote all
over steer said:
The only motivation was greater reliability. Thanks for the information, will proceed accordingly.
It's worth looking into 'doughnut savers' or whatever they're officially called- devices which can be used in combination with doughnuts to stop the driveshaft from flailing about in the event of a failure.

over steer

Original Poster:

123 posts

213 months

Monday 13th July 2020
quotequote all
HustleRussell said:
It's worth looking into 'doughnut savers' or whatever they're officially called- devices which can be used in combination with doughnuts to stop the driveshaft from flailing about in the event of a failure.
Thanks for the tip, will look into these.

ChevronB19

6,375 posts

170 months

Tuesday 14th July 2020
quotequote all
And vaguely on topic, I noticed these today if you’re interested (not my advert).

https://www.racecarsdirect.com/Advert/Details/1145...

over steer

Original Poster:

123 posts

213 months

Wednesday 15th July 2020
quotequote all
ChevronB19 said:
And vaguely on topic, I noticed these today if you’re interested (not my advert).

https://www.racecarsdirect.com/Advert/Details/1145...
Nice! Ours is trimmed in red though as that goes better with its colour scheme: https://www.instagram.com/p/BI5han-gbiQXiECnFW7DH2...

On the hunt for an Ali bodied Lotus XI though and those would be perfect for it.