Help Dashboard connections tvr 1800s

[MORTIMER84]

Hello. Im doing the conections of the dashboard and i have some cuestions.
The clocks are ok. The 3 lights , one is for the blinkers, the second one for the lights when long lights are conected and the thirth one???
With the interruptors i have the same problem. One its for lights (position lights) other for screens washers (wimpers maybe en english) other for the fan of the heater and the forth one???

I have the dashboard that its in 4 panels done but i think its the same


Regard

[TVRHTV]

On mine the warning lights are; Ignition on, High beam (long head lamps) and turn signal warning.
The switches are Heater fan, Engine fan (electric) Instrument panel illumination and car lights.

But of course its 53 years old and has at least on change of dashboard.

[Andrew Gray]

MORTIMER84 said:

Hello. Im doing the conections of the dashboard and i have some cuestions.
The clocks are ok. The 3 lights , one is for the blinkers, the second one for the lights when long lights are conected and the thirth one???
With the interruptors i have the same problem. One its for lights (position lights) other for screens washers (wimpers maybe en english) other for the fan of the heater and the forth one???

I have the dashboard that its in 4 panels done but i think its the same


Regard

Ignition charge light probably which goes out after the engine starts
You then have
1 wiper Switch
2 Heater fan switch
3 light switch
4 washer water switch
I would expect

[luc3000s]

hazard light switch??

[MORTIMER84]

Perfect. Thanks

I have there the wire of ignition,

gnition charge light probably which goes out after the engine starts ( yes. I prove it)
IHight bean and turning signal



1 wiper Switch
2 Heater fan switch
3 light switch
4 washer water switch

Its my configuration, i think that washer was a modification