Aurelius question 6. Front bearing

Aurelius question 6. Front bearing

Author
Discussion

aureliusTVR

Original Poster:

102 posts

99 months

Wednesday 12th April 2017
quotequote all
Hello
Made a start on the front corner this afternoon. To be honest, it went far easier than expected (maybe too easy). I've seen plenty of you tube vids which outline the necessity for specialist tools but both inner and outer bearings came out with just a tap.
But looking at the hub, someone in the past has not be kind to it and I would appreciate your opinion if it is safe to still use it with the the new bearings or if it needs scrapping. When I was removing the old grease from within, I found what I believe is 3 old needle rollers plus various other bits of shrapnel, none of which look to belong to the existing bearing so may have been left behind from an older failure.
[url]
|https://thumbsnap.com/pzLuKcFN[/url]
There are various nicks in the hub and also at the base of the stub axle



What do you reckon?

Andrew Gray

4,969 posts

156 months

Wednesday 12th April 2017
quotequote all
You could use it as an excuse to do an upgrade
A number of owners have upgraded to these
http://classicdrivingdevelopment.co.uk/products.as...
I think i have the ones i took off somewhere if not
Andrew

GAjon

3,804 posts

220 months

Wednesday 12th April 2017
quotequote all
The outer races need tapping out of the hub, the new bearings come with both inner and outer races.

ATE399J

729 posts

244 months

Wednesday 12th April 2017
quotequote all
What does the rest of the stub axle look like?
As has been said, you need to remove the bearing outer "sleeves" from the hub so it is probably OK. If the stub axle is grooved, pitted or generally looking second hand it may be due a replacement perhaps.

aureliusTVR

Original Poster:

102 posts

99 months

Wednesday 12th April 2017
quotequote all
Of course!, I'll see if have time tomorrow and try and tap the races out.
As ever, thanks for the feedback.

Andrew Gray

4,969 posts

156 months

Thursday 13th April 2017
quotequote all
Had a look and yes i have these
The One stub axle is new the other one i chucked not worth saving

Send me an e mail if they are of help
Andrew

aureliusTVR

Original Poster:

102 posts

99 months

Friday 14th April 2017
quotequote all
Cheers Andrew, that's very good of you. I did manage to get the races out this morning but despite my best efforts at being gentle, there are still some battle scars, which may or may not be my doing. Given the overall condition, I'm considering sending it off to Adrian to assess, if he deems it unuseable, I may come back to you. See images below and thanks again.



Edited by aureliusTVR on Friday 14th April 00:11