Heating connections

[a.gerrard]

Hi

Just taken the dash of the car to find out the heater pods are not connected!! I have bought some tubing. the air comes out of 1 hole in the bulk head so a need a connector that will go into the hole and then spilt off to feed the 4 heater pod tubes. any ideas? or pics

Andrew

[nwarner]

Andrew

I've got a diagram that was sent to me showing the layout of the heater pipes. The diagram is the same as the layout in my 3000S so I'm not sure if it would be the same as yours. If you want me to send it to you email me at [e-mail]

Regards

Nige

[Terminator]

The heating and ventilation systems are different for the 3000M to that of the Taimar and 3000S.

I can fax you the 3000M system (page 2.42 of the parts manual) if you like. Let me know...

[adrian@]

a.gerrard said:

Hi Just taken the dash of the car to find out the heater pods are not connected!! I have bought some tubing. the air comes out of 1 hole in the bulk head so a need a connector that will go into the hole and then spilt off to feed the 4 heater pod tubes. any ideas? or pics Andrew

Andrew, the inner shell of an 3000M is one wall of the heater distribution box (the black fibreglass panel that is above the gearbox , behind the engine which is fed by the fan motor, in the footwell by a 3" pipe) IF you only have one hole to feed 4 eyelets you just cut another hole and put a piece of tube in an connect it up.
Adrian