Auction: 1975 Porsche 911
Discussion
Regarding the mileage question, the MoT records the mileage as 30,599 in 2018. That is 130,599. These old odometers don’t go beyond 99,999… so start from 0 at 100k. Note the mileage now is 132k… so I’ve done a couple of thousand miles since then. I only drive her locally and in the summer months.
Hi.
My laptop isn't able to enlarge the invoices so that they are readable.
What other engine work was carried out when the pistons and cyls
were replaced? Any cylinder head work, ie, valves or guides, cam
chains, big ends, main bearings etc?
Do you have any pics of the underside of the car?
I would like to view the car but unfortunately I'm in Switzerland until
next week by which time the auction will have finished.
Thanks in advance.
Andy
My laptop isn't able to enlarge the invoices so that they are readable.
What other engine work was carried out when the pistons and cyls
were replaced? Any cylinder head work, ie, valves or guides, cam
chains, big ends, main bearings etc?
Do you have any pics of the underside of the car?
I would like to view the car but unfortunately I'm in Switzerland until
next week by which time the auction will have finished.
Thanks in advance.
Andy
tc911 said:
Hi, do you know if car is original colour/exterior and interior and has original engine and gearbox
Thank you
Hi, the car colour is original Emerald Green metallic. Interior is original black but I suspect the front leatherette seat covers have been replaced at some point. Regarding the engine, I can confirm it’s the original with matching numbers. Not sure about the gearbox to be honest. No evidence of any change in the history file. Thank you
jaruk said:
Hi.
My laptop isn't able to enlarge the invoices so that they are readable.
What other engine work was carried out when the pistons and cyls
were replaced? Any cylinder head work, ie, valves or guides, cam
chains, big ends, main bearings etc?
Do you have any pics of the underside of the car?
I would like to view the car but unfortunately I'm in Switzerland until
next week by which time the auction will have finished.
Thanks in advance.
Andy
Hi Andy, engine was stripped and components cleaned. New parts recorded on the invoice - cylinder liners and pistons, head stud bolts and seals/gaskets. Note a new clutch kit was fitted when the engine was out.My laptop isn't able to enlarge the invoices so that they are readable.
What other engine work was carried out when the pistons and cyls
were replaced? Any cylinder head work, ie, valves or guides, cam
chains, big ends, main bearings etc?
Do you have any pics of the underside of the car?
I would like to view the car but unfortunately I'm in Switzerland until
next week by which time the auction will have finished.
Thanks in advance.
Andy
I have a photo log of the works done but I don't actually have a photo of the finished article! The most significant works on the underside was a replacement luggage compartment floor. There were other bits addressed too....basically everything that needed done was done.
Gassing Station | PistonHeads Auction Listings | Top of Page | What's New | My Stuff