2000 Peugeot 306 Gti 6

[jackpe]

https://www.pistonheads.com/buy/auction/16375641

Edited by jackpe on Monday 11th March 16:48

[turbobungle]

Hi Jack, the car looks lovely, couple of questions, 1/ at 27 seconds in on the video, there is what seems like a large scratch on the passenger side front wing, I assume this is just the sunlight and a dodgy angle, can you confirm? 2/ The first interior pic seems to show temps in the red, but all seems fine in the video, again, can you confirm there are no issues with overheating? Thanks

[jackpe]

Hi!

1. It is absolutely just a trick of the light, definitely no scratch on the wing.

2. The temp gauge very occasionally will read max when key ignition is turned to start the car, turn it off and on again and it goes back to normal. This very rarely happens.. probably 4-5 times in my whole ownership, but sod's law it did during one of the pics. French electrics! Car has never had any problems with cooling.

Edited by jackpe on Friday 15th March 12:13

[peterhenry07]

Hi there, how many owners has the car had? One of the biggest issue with these car is the floor being damaged as the jacking points were not used properly, is the floor in good condition? Finally is the boot floor rust free? Thanks, Peter.

[jackpe]

Hi, the 306 has 4 previous owners. The chassis bits you mention have not been jacked, it is very good underneath. Have included some of my channel videos which give lots of info on what was done to the car and show the underside:

Video showing work to seats and stereo:
https://youtu.be/a2R6KYOoH0w

Inspection by PugOneOff also showing some of the work I did to the car:
https://www.youtube.com/watch?v=hwFeqJpYG28

A laterr video showing the underside in more detail and the under-sealing I carried out a few months ago:
https://youtu.be/C2pCAmgaD1Y

[Cam Tait]

Just to add a bit more flesh to the bone, we've put together a more in depth video on Jack's lovely 306 GTI-6. Massive thank you to Jack for allowing us to put the GTI-6 on film, and hope you enjoy what we've come up with:

[Mark-9h1ap]

Hi Jack
Enjoy the channel and have a question on the car.
On a couple of the videos you mention a cut out issue - you got the PugOneOff guys to rectify it but it returned.
I don’t recall seeing any thing else on that issue - did it get resolved and what was the root cause?

Thanks

Mark

[jackpe]

Hi!

It is resolved. Sticky ICV valve previously replaced with a used one that still wasn’t perfect, just replaced with a brand new one.

[Arbu6677]

Hi, could you provide any further details re the air con not working please?… what the issue or possible issue is and cost to repair if known. Thanks and regards

[jackpe]

No idea sorry.. never really bothered me so never tried to re-gas, could be that but could also be something more involved. I think they are notorious for not working on 306s.

[jackpe]

No idea sorry.. never really bothered me so never tried to re-gas, could be that but could also be something more involved. I think they are notorious for not working on 306s.