Porsche 997.2 Parts For Sale
Discussion
Porsche 997 Parts for Sale
All sold - thank you for looking
Photos For All Items: here
FVD Brombacher Exhaust - SOLD
details here
Suitable for 997.2 when fitted with GT3 rear bumper (see my other items)
Complete system from headers to tips. Stainless steel with 200 cell catalytic converters
Centre exit tips with 2x90mm tips
Less than 1000 miles before it was taken off car (change of situation and car returned to stock prior to sale)
The tips are in cosmetically perfect condition (I now realise I’ve not buffed them properly for photos). The rest shows some marks from installation and use but this is an exhaust and you’re never going to see it.
Gives a “grown up” sporty noise at low revs (entirely tolerable around town or on the motorway) and sounds like a cup car at high revs.
No valves/switches to fail
Adds 28bhp or can be tuned further. I’m including the MyGenius tuning hardware but I believe the maps are coded to VIN number so you will probably need to buy a tune (sent via email) from FVD if you want to take things further.
Includes 2 lambda sensors
Cost £6000
£1500 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
OZ Ultraleggera HLT- SOLD
4 wheels
Race silver colour
19” Porsche 997 fitment (possibly others)
Fitted with Michelin Pilot Super Sport 305/30 on the rear
Fitted with Michelin Pilot Super Sport 235/35 on the front
This is GT3 fitment, I had them on a standard Carrera with very slight trimming to plastic brake surrounds.
Coloured centre caps
Less than 1000 miles before they were taken off car (change of situation and car returned to stock prior to sale)
6-7mm tread (even)
Stored under cover indoors since being taken off car
No curbing whatsoever. Slight marks to a few spokes of one wheel which I think probably occurred in storage. Could be easily fixed or wait for something worse to happen before refurbing.
These look fantastic and also make a noticeable difference to unsprung weight which can be felt.
Cost over £3000
£1000 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
997.2 GT3/Cup front bumper - SOLD
Carbon fibre
997.2 cup front bumper
Painted carrara white by Porsche specialist body shop. Expert repair to a track related accident (I assume)
Includes side lights and driving lights
Cup grills but frames included if you wanted to put road parts in instead
Fitted with carbon fibre canards. Not difficult for a body shop to fill and paint if you wanted to lose these.
Fitted to a Carrera S to give GT3 look
Less than 1000 miles before taken off car (change of situation and car returned to stock prior to sale)
£300 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
997.2 GT3 Style Rear Bumper - SOLD
Fitted to Carrera S to give GT3 look and to use centre exit exhaust: ie. Designed for standard width 997
Not original Porsche part but high quality reproduction. Owned from new.
Painted carrara white by Porsche specialist body shop
All grills in black
Few marks which I think probably occurred in storage. Easy fix.
Less than 1000 miles before taken off car (change of situation and car returned to stock prior to sale)
£200 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
All sold - thank you for looking
Photos For All Items: here
FVD Brombacher Exhaust - SOLD
details here
Suitable for 997.2 when fitted with GT3 rear bumper (see my other items)
Complete system from headers to tips. Stainless steel with 200 cell catalytic converters
Centre exit tips with 2x90mm tips
Less than 1000 miles before it was taken off car (change of situation and car returned to stock prior to sale)
The tips are in cosmetically perfect condition (I now realise I’ve not buffed them properly for photos). The rest shows some marks from installation and use but this is an exhaust and you’re never going to see it.
Gives a “grown up” sporty noise at low revs (entirely tolerable around town or on the motorway) and sounds like a cup car at high revs.
No valves/switches to fail
Adds 28bhp or can be tuned further. I’m including the MyGenius tuning hardware but I believe the maps are coded to VIN number so you will probably need to buy a tune (sent via email) from FVD if you want to take things further.
Includes 2 lambda sensors
Cost £6000
£1500 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
OZ Ultraleggera HLT- SOLD
4 wheels
Race silver colour
19” Porsche 997 fitment (possibly others)
Fitted with Michelin Pilot Super Sport 305/30 on the rear
Fitted with Michelin Pilot Super Sport 235/35 on the front
This is GT3 fitment, I had them on a standard Carrera with very slight trimming to plastic brake surrounds.
Coloured centre caps
Less than 1000 miles before they were taken off car (change of situation and car returned to stock prior to sale)
6-7mm tread (even)
Stored under cover indoors since being taken off car
No curbing whatsoever. Slight marks to a few spokes of one wheel which I think probably occurred in storage. Could be easily fixed or wait for something worse to happen before refurbing.
These look fantastic and also make a noticeable difference to unsprung weight which can be felt.
Cost over £3000
£1000 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
997.2 GT3/Cup front bumper - SOLD
Carbon fibre
997.2 cup front bumper
Painted carrara white by Porsche specialist body shop. Expert repair to a track related accident (I assume)
Includes side lights and driving lights
Cup grills but frames included if you wanted to put road parts in instead
Fitted with carbon fibre canards. Not difficult for a body shop to fill and paint if you wanted to lose these.
Fitted to a Carrera S to give GT3 look
Less than 1000 miles before taken off car (change of situation and car returned to stock prior to sale)
£300 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
997.2 GT3 Style Rear Bumper - SOLD
Fitted to Carrera S to give GT3 look and to use centre exit exhaust: ie. Designed for standard width 997
Not original Porsche part but high quality reproduction. Owned from new.
Painted carrara white by Porsche specialist body shop
All grills in black
Few marks which I think probably occurred in storage. Easy fix.
Less than 1000 miles before taken off car (change of situation and car returned to stock prior to sale)
£200 ONO
Will deliver within 50mile of NG14. Beyond that – all things are possible.
Advertised Elsewhere
Edited by jrb43 on Sunday 22 September 19:25
Edited by jrb43 on Tuesday 24th September 11:33
Gassing Station | Parts and plates | Top of Page | What's New | My Stuff