How do you reset the 'service' reminder?

[kitcat7]

My '20 Legende has done only a few hundred miles this year and the service reminder light is showing, I have no dealer close to me and assume it is an easy job to reset, either through the OBD port or pressing a combination of stalk buttons.

Can anyone either tell me how it is done, or give me a link to a Youtube vid. (in English please).

Thanks.

Paul

[Aladoro69]

I went through this in COVID where have used the car
I managed to find that the Megane reset method worked for me
I did write it up but cannot find in as a separate forum topic so unfortunately it's in the middle of the 300 page Alpine Owners mega topic of you can find a way to search either on that or via my user name
If not try googling Mégane service reset

[Liam22]

Can't remember where I copied this from. Haven't tried it myself
---

With the display (in normal) on the left dial in the cycle that allows the pressure reset, trip and overall mileage, the service notification appears then when it's coming to mileage or time.

There are actually 2 service messages, 1 for oil change and other for service.

With the display set on one of these, press and hold the end button on the left stalk for approx 10 seconds.

During this time the message flashes and finally settled on the next service interval.

Release the button.

Press again to get to the 2nd service message and then repeat the 10 seconds press.

[kitcat7]

Thank you both, i will give this a try, otherwise do a search through the mega Alpine topic.

I will post back if i have success, so other owners will know what to do. It shouldn't be a great secret.

[astage]

If you have a manual, or the PDF copy, it's under Trip Computer - pages 1.57/1.58 in my late 2021 manual