2.5 exhaust

[evo 1]

want to upgrade the exhaust on my 2001 2.5 - have contacted roush and piper cams by e-mail + phone numerous times(over the last 3 weeks) BUT no one ever gets back to me = s--t service - they are not interested in the 2.5 model = bunch of-----! i have now decided after info. and help from other users on this site to have an exhaust system made locally - decat/no Y section/heatwrapped etc. + any further advise?!
Could someone please advise me on where i can get the fuel pump + wiring loom upgrade from + is it possible to get hold of the softwear needed for a more local rolling road remap.
i also would like to know where and how exactly to access the ecu and fuel pump.
Thanks

[mgbond]

evo 1 said:

want to upgrade the exhaust on my 2001 2.5 - have contacted roush and piper cams by e-mail + phone numerous times(over the last 3 weeks) BUT no one ever gets back to me = s--t service - they are not interested in the 2.5 model = bunch of-----! i have now decided after info. and help from other users on this site to have an exhaust system made locally - decat/no Y section/heatwrapped etc. + any further advise?!
Could someone please advise me on where i can get the fuel pump + wiring loom upgrade from + is it possible to get hold of the softwear needed for a more local rolling road remap.
i also would like to know where and how exactly to access the ecu and fuel pump.
Thanks

H+S do one for the 2.5. Noblemods website has details and also fuel pump. Fuel pump is in nearside rear section in front of the rear wheel and the ECU is in the same position on the Off side. If you have had the ECU upgrade to MBE then there are only a few people that can get into the map. PM me for some more details about that. Software can be downloaded.

Bondy

[bernhund]

evo 1 said:

want to upgrade the exhaust on my 2001 2.5 - have contacted roush and piper cams by e-mail + phone numerous times(over the last 3 weeks) BUT no one ever gets back to me = s--t service - they are not interested in the 2.5 model = bunch of-----! i have now decided after info. and help from other users on this site to have an exhaust system made locally - decat/no Y section/heatwrapped etc. + any further advise?!
Could someone please advise me on where i can get the fuel pump + wiring loom upgrade from + is it possible to get hold of the softwear needed for a more local rolling road remap.
i also would like to know where and how exactly to access the ecu and fuel pump.
Thanks

I contacted Roush recently and they told me they are no longer dealing with Nobles.

[evo 1]

thanks for the info - i will order my fuel pump+++! from noblemods

[humpy]

evo 1 said:

thanks for the info - i will order my fuel pump+++! from noblemods

Go for the M400 fuel pump - it's quieter than the Motorsport pump and more than up to the job on a 2.5

Edited by humpy on Sunday 30th March 14:47

[F.C.]

bernhund said:

evo 1 said:

want to upgrade the exhaust on my 2001 2.5 - have contacted roush and piper cams by e-mail + phone numerous times(over the last 3 weeks) BUT no one ever gets back to me = s--t service - they are not interested in the 2.5 model = bunch of-----! i have now decided after info. and help from other users on this site to have an exhaust system made locally - decat/no Y section/heatwrapped etc. + any further advise?!
Could someone please advise me on where i can get the fuel pump + wiring loom upgrade from + is it possible to get hold of the softwear needed for a more local rolling road remap.
i also would like to know where and how exactly to access the ecu and fuel pump.
Thanks

I contacted Roush recently and they told me they are no longer dealing with Nobles.

I just had a job done by Roush on mine last week.
F.C.

[ThatPhilBrettGuy]

F.C. said:

bernhund said:

evo 1 said:

want to upgrade the exhaust on my 2001 2.5 - have contacted roush and piper cams by e-mail + phone numerous times(over the last 3 weeks) BUT no one ever gets back to me = s--t service - they are not interested in the 2.5 model = bunch of-----! i have now decided after info. and help from other users on this site to have an exhaust system made locally - decat/no Y section/heatwrapped etc. + any further advise?!
Could someone please advise me on where i can get the fuel pump + wiring loom upgrade from + is it possible to get hold of the softwear needed for a more local rolling road remap.
i also would like to know where and how exactly to access the ecu and fuel pump.
Thanks

I contacted Roush recently and they told me they are no longer dealing with Nobles.

I just had a job done by Roush on mine last week.
F.C.

I believe they're just not growing their customer base for Nobles.

[sean j g]

hi evo 1 you are still going on about your exhaust but dont you need to have the car back from the garage first!!!!

[Richie350]

Hi Evo, who is making your exhaust for you?

[evo 1]

IS THAT SEANNNNNNN I USE TO HAVE A NOBLE BUT WAS A F------ Q--- AND SOLD IT AND NOW HAVE AN OLD MAN TVR JGGJG MY OLD MATE GEORGEY BOY PERHAPS?!