clutch noise?
Author
Discussion

elenitro

Original Poster:

245 posts

223 months

Tuesday 18th March 2008
quotequote all
Hi All,

I had a strange noise on the way to work this morning. When sat in traffic there seemed to be a dull tapping noise that went away when i put my foot on the clutch but always came back whilst in neutral idling. Is this something I should be concerned about?

Leon

ThatPhilBrettGuy

11,810 posts

269 months

Tuesday 18th March 2008
quotequote all
That's fine. Usually just the release bearing moving a bit.

F.C.

3,901 posts

237 months

Tuesday 18th March 2008
quotequote all
yes
F.C.

NobleGuy

7,133 posts

244 months

Tuesday 18th March 2008
quotequote all
Mine does that since I had the diff done.

AMG Merc

11,955 posts

282 months

Tuesday 18th March 2008
quotequote all
What they said. It may clear if you blip the throttle (clutch in/in neutral).

elenitro

Original Poster:

245 posts

223 months

Tuesday 18th March 2008
quotequote all
Cheers guys.


One more thing.....is it normal to be a right pain to get it into 1st gear (6 speed box) when starting her up from cold? It's not a problem when she's warmed up.


Leon

Jenx

11,579 posts

271 months

Tuesday 18th March 2008
quotequote all
No, not normal to that extent, but they are better when warm.

Adrian W

15,493 posts

257 months

Tuesday 18th March 2008
quotequote all
first thing to do is to get it bled.

leeshell

278 posts

229 months

Tuesday 18th March 2008
quotequote all
elenitro said:
Cheers guys.


One more thing.....is it normal to be a right pain to get it into 1st gear (6 speed box) when starting her up from cold? It's not a problem when she's warmed up.


Leon
Mine is a right pain to get it into 2nd gear, until it's warm and then it's fine....

gadgeroonie

5,362 posts

265 months

Tuesday 18th March 2008
quotequote all
elenitro said:
Cheers guys.


One more thing.....is it normal to be a right pain to get it into 1st gear (6 speed box) when starting her up from cold? It's not a problem when she's warmed up.


Leon
mine is the same - simple solution select 2nd first and then into first

works every time, i guess putting it in 2nd helps spin the cold oil up and makes it free to go into first ?