Front Splitter

[elf63]

Damaged my front splitter at Silverstone on friday so would like a replacement Carbon Fibre type. Anyone up for selling theirs or where`s the best place to buy from ?
Cheers,
Steve

[MadMacMcMad]

Mine has broken/been hit a few times, especially getting onto ferries etc, so I now make my own out of black perspex.
Looks good and costs pennies compared to the carbon one.

[gadgeroonie]

mac - got any pics of it ?

[Lakelord]

elf63 said:

Damaged my front splitter at Silverstone on friday so would like a replacement Carbon Fibre type. Anyone up for selling theirs or where`s the best place to buy from ?
Cheers,
Steve

Steve
There's a standard GRP one on eBay at the mo

http://cgi.ebay.co.uk/noble-front-splitter_W0QQite...

but if you really want Carbon Fibre, Noblemods sell them http://www.noblemods.co.uk/exterior.html

[m12_nathan]

Lakelord said:

elf63 said:

Damaged my front splitter at Silverstone on friday so would like a replacement Carbon Fibre type. Anyone up for selling theirs or where`s the best place to buy from ?
Cheers,
Steve

Steve
There's a standard GRP one on eBay at the mo

http://cgi.ebay.co.uk/noble-front-splitter_W0QQite...

but if you really want Carbon Fibre, Noblemods sell them http://www.noblemods.co.uk/exterior.html

Lakelord - as a point of interest the ones on your car may well be the only set sold by the factory. They were made by a place that did composites for McLaren. I ordered them after I saw them on Lee's race car but have a feeling the profit margin wasn't there on them as the guy I spoke to said in the end they cost more to make than Noble had agreed to sell to me for.

[F.C.]

Worth a look perhaps,

http://www.reverie.ltd.uk/shop/products.php?g1=5f8...

F.C.

[Biggriff]

I am having a three piece one made at the moment in carbon. This will mean if I ding it (inevitable) that the bit I have damaged just gets replaced.

I will post piccies when it arrives.

Richard

[elf63]

Biggriff said:

I am having a three piece one made at the moment in carbon. This will mean if I ding it (inevitable) that the bit I have damaged just gets replaced.

I will post piccies when it arrives.

Richard

Thanks Richard, looking forward to that.
Steve

[MadMacMcMad]

gadgeroonie said:

mac - got any pics of it ?

I will take some pickies and email. I don't know how to post them on the forum (numpty)

[VPRMAN]

I got one carbon splitter left, was going to be putting it on EBAY shortly

I wasn't planning on making any more as I think Richards three piece would work better

E mail me if you are interested

Colin

[gadgeroonie]

MadMacMcMad said:

gadgeroonie said:

mac - got any pics of it ?

I will take some pickies and email. I don't know how to post them on the forum (numpty)

pm sent (y)

[MadMacMcMad]

gadgeroonie said:

MadMacMcMad said:

gadgeroonie said:

mac - got any pics of it ?

I will take some pickies and email. I don't know how to post them on the forum (numpty)

pm sent (y)

Thanks, I'll get onto it tomorrow.

[gadgeroonie]

here are the pics

I think it looks quite nice !

Andy - I think if you could get some flexible perspex type stuff in black you could have a business !

is there a trick to cuting the perspex and making the cut look good ?

[MadMacMcMad]

I find that I replace these once a year, usually after a trip to France. The ferry can be unforgiving.
They are easy to cut out, but I would suggest using macralon rather than perspex. It is easier to work and has a bit of flex.
Use a jigsaw, then various files and finish with a bit of wet n dry on the edge.
Takes me about an hour to do both. I have a card pattern, so the hard work is done really.

You should be able to get some material from wicks or B&Q etc.

[Mr Noble]

elf63 said:

There's a standard GRP one on eBay at the mo

http://cgi.ebay.co.uk/noble-front-splitter_W0QQite...

I won this one

[worty]

Mr Noble said:

elf63 said:

There's a standard GRP one on eBay at the mo

http://cgi.ebay.co.uk/noble-front-splitter_W0QQite...

I won this one

I thought it was an auction not a tombola
worty

[alex s]

I have a original Noble splitter sitting in my garage...£70 if anyone wants it.

Alex

[Mr Noble]

alex s said:

I have a original Noble splitter sitting in my garage...£70 if anyone wants it.

Alex

Did you do that just to pi44 me off?? Well did-ya??

[RobP]

Welcome back Greg - enjoy the snowboarding??

[alex s]

Mr Noble said:

alex s said:

I have a original Noble splitter sitting in my garage...£70 if anyone wants it.

Alex

Did you do that just to pi44 me off?? Well did-ya??

Nah, if it makes you feel better, mine is used. , so you still got bargin.
Just need rid of to make way for some new shiny bits from Revire.