Stainless screws for under trays?

[F.C.]

Thought I saw a thread about replacing the under tray screws et al on the forum.
Couldn't find it so does anyone know off hand the size/s and type of the screws fitted?
Also a supplier of decent stailess replacements.
I would have a look myself but the car is in the garage at the moment so I can't.
F.C.

[Biggriff]

I can get these from Diss Fasteners. I will unscrew one and get a price.

[Mr Noble]

I think I'd have to pay a man to do that job!!

Would like a packert of them though please

[Biggriff]

very funny. I will get a price and post on here. If anyone wants some I will see what I can get for a bulk trade order.

Richard

[F.C.]

Biggriff said:

I can get these from Diss Fasteners. I will unscrew one and get a price.

Cheers, that will be a great help.
F.C.

[Biggriff]

I don't think they will be a lot as they will sell in bulk and i generally pay next to nothing for these sort of things. A few quid will do the whole underside I expect.

Get car back from Roush on Friday! A record for me as I had not even had it more than 3 days before it was modified.

Richard

[ajg31]

think there is about 90 screws to replace. I bought 4mm x 20mm tappers, but only zinc plated as my usual fastener shop did not have anything stainless in stock.

[NobleGuy]

ajg31 said:

think there is about 90 screws to replace. I bought 4mm x 20mm....

Are these the same size as the diffuser screws? I could do with a set for when I re-attach it.

[ajg31]

The length is fine. Think there are about 10 screws that were 5mm shorter for some reason originally. 4mm is tight when they go into the metal box section, but i am sure they are the same as std, and they are nice and solid. 3.5mm may be easier to screw in but i preferred knowing they are not going to work loose

[alex s]

ajg31 said:

The length is fine. Think there are about 10 screws that were 5mm shorter for some reason originally. 4mm is tight when they go into the metal box section, but i am sure they are the same as std, and they are nice and solid. 3.5mm may be easier to screw in but i preferred knowing they are not going to work loose

Screwfix, do A2 stainless self tappers for about £2/100.
www.screwfix.com
HTH