toe in/out settings

[sean_goodman]

found this which details toe settings

http://www.justgofaster.com/gallery/gallery/nathan...

i am going to go get mine cheked at a local motorsport company tomorrow who will undoubtably have no knowledge of nobles but are a decent company.

i read early/later for the 3R what can be defined as early or late as i will need to know if mine is early or late.

are the figures listed total across the axle or each side? ie 2mm toe out, is that each side 2mm toe out or each side 1mm giving a total of 2mm, if you see what i mean.

tried search function but didnt really get anywhere,

waiting for some cleaver chap to post a link and say i didnt look hard enough lol

cheers guys
sean

[m12_nathan]

That data came from Barney at the factory - you might want to check they are still the recommended settings...

[mgbond]

sean_goodman said:

found this which details toe settings

www.justgofaster.com/gallery/gallery/nathan/noble/NobleData.doc

i am going to go get mine cheked at a local motorsport company tomorrow who will undoubtably have no knowledge of nobles but are a decent company.

i read early/later for the 3R what can be defined as early or late as i will need to know if mine is early or late.

are the figures listed total across the axle or each side? ie 2mm toe out, is that each side 2mm toe out or each side 1mm giving a total of 2mm, if you see what i mean.

tried search function but didnt really get anywhere,

waiting for some cleaver chap to post a link and say i didnt look hard enough lol

cheers guys
sean

Ask (yellowshed) on here or call plans for best set-up.

Bondy

[sean_goodman]

mine was first registered 1/9/03. would that make it an early or late car? not sure on production times for the 3r and search aint workin again

[V6GTO]

Mine is one year newer than yours (to the day!) and is one of(if not) the last. HTH.

Martin.

[sean_goodman]

i looked on gto3.com and there it stated 3r was 2003 onwards so i reckon mine is in the early class.

also seen in the US manual that settings are per wheel.

so front early = 2mm toe out per wheel or total across axle 4mm.