Discussion
Nothing serious. Im just putting in a set of reversing sensors and need to color match them. If anyone is interested they are from a company called "Steelmate" and are the audio only ones (PTS 400). I had them on my previous car (Titanium M12) and they were very useful. Bought direct from the importer in Markyate Nr Luton. Sensors are really discreet (fitted along the vertical part of the car (where the Noble badge is) with the control unit up in the space in the rear clam (behind where the pwr steering resevoir sits).
Matching the titanium was easy (lambo colour) but this has been more difficult as it appears that it is a Noble only colour. Anyway had a pot of touchup from the factory so just bought a little airbrush (£20 Halfords) so job is now done
Regards
Richard
PS Dave I ll send you that link
Matching the titanium was easy (lambo colour) but this has been more difficult as it appears that it is a Noble only colour. Anyway had a pot of touchup from the factory so just bought a little airbrush (£20 Halfords) so job is now done
Regards
Richard
PS Dave I ll send you that link
Martin
The last kit I used on the M12 used 12A sensors which need an 18.5 mm hole. The kit I have just got for the M400 uses a slight variation on the 12A sensors, they are now located more positively using a metal clip rather than silicon strips, if you look at the PTS400 system on the Steelmate site it still shows the old sensors with the silicon, the new ones will look exactly the same once installed.
Got the sensors and control box put in today and all is working, just have to route the beeper into the Cabin tomorrow.
I'll send you some pics of the whole thing when I've finished
Regards
Richard
The last kit I used on the M12 used 12A sensors which need an 18.5 mm hole. The kit I have just got for the M400 uses a slight variation on the 12A sensors, they are now located more positively using a metal clip rather than silicon strips, if you look at the PTS400 system on the Steelmate site it still shows the old sensors with the silicon, the new ones will look exactly the same once installed.
Got the sensors and control box put in today and all is working, just have to route the beeper into the Cabin tomorrow.
I'll send you some pics of the whole thing when I've finished
Regards
Richard
Gassing Station | Noble | Top of Page | What's New | My Stuff